Check the brewer

Inspect the glass or body for damage and make sure the filter assembly is secure. Set the press on a stable, heat-resistant surface. Check its usable capacity before filling, leaving room for the lid and plunger. Follow the equipment instructions, especially when handling glass and hot water.

Choose a suitable grind

Begin with a medium-coarse grind that works with your filter. Very fine particles may make pressing difficult and leave more sediment, while an extremely coarse grind can taste thin. Grind shortly before brewing if practical. Use the first cup to decide whether a small change would help.

Weigh coffee and water

A useful starting point is 20 grams of coffee to 320 grams of water, or 1:16. Scale both amounts together for a larger press without exceeding its capacity. Place the coffee in the brewer and pour the measured hot water carefully, making sure all the grounds become wet.

Allow a gentle steep

Stir gently to wet any dry pockets, then fit the lid according to the brewer’s instructions without pressing yet. Try a steep of around four minutes as a starting point. Keep the press stable while waiting, and note the time so you can repeat or adjust the result.

Press without forcing

Lower the plunger slowly with the lid properly seated and the spout directed away from you. Stop if it resists; never force the plunger through a blocked bed. Let the grounds settle and consult the equipment instructions before continuing. A finer grind may be the cause of resistance.

Serve and clean promptly

Pour the brewed coffee into cups or a heat-safe server so it does not continue sitting with the grounds. A little sediment is normal for this method. Once the press is safe to handle, discard the grounds and wash the parts as directed, checking the filter for trapped coffee.

Back to the journal