Read the equipment instructions

Find the cleaning section for your exact grinder before removing parts. Check which components are removable, which may be washed and whether any cleaning products are approved. Burr assemblies and adjustment mechanisms differ. If the instructions do not describe a step, do not assume a similar-looking grinder provides a safe guide.

Disconnect before cleaning

Switch off and unplug an electric grinder before touching accessible internal parts or removing its hopper. Follow the instructions for battery-powered equipment as well. Keep the plug away from water and work on a clear surface. Wait for moving parts to stop completely before you begin handling the mechanism.

Empty loose grounds

Remove remaining beans and tip out loose grounds using the procedure in the manual. A small tray underneath can catch the mess without sending coffee across the counter. Keep screws and removable pieces together in order. Do not reach into hidden areas or use force to release a stuck part.

Brush accessible dry parts

Use a clean, dry brush suitable for the grinder to loosen grounds from the accessible areas identified in the instructions. Work gently around edges and openings. Avoid sharp tools, improvised chemicals and blowing moisture into the mechanism. A little regular attention can make a heavy buildup easier to avoid.

Keep water away from burrs

Keep burrs, motors and electrical parts dry unless the manufacturer explicitly gives a different cleaning procedure. Wash only components identified as washable, then let them dry completely before reassembly. Do not run water through a grinder to rinse it, and do not put damp parts back into the coffee path.

Reassemble and check the setting

Refit each component in the correct order and make sure the hopper and guards are secured before reconnecting power. Restore your recorded grind setting using the manufacturer’s procedure. If a trial grind is recommended, follow that guidance. Stop using the grinder if it makes an unfamiliar sound or parts do not seat correctly.

Back to the journal